assembly with this component
Basic
| Type | LiFePO4 |
| Voltage | 51.2 |
| Capacity | 100 Ah |
| Nominal capacity, kWh | 5.12 |
| Charging voltage | 44.8 – 57.6 |
| Recommended charge/discharge current | 50 А |
| Maximum charge/discharge current | 100 |
| Peak value | 125 A for 2 minutes |
| Storage temperature | 5°C – +45°C |
| Operating temperature of the charge | 0°C – +50°C |
| Operating discharge temperature | -20°C –+55°C |
| Number of cycles | 6000 |
| Degree of protection of the case | IP20 |
| Interfaces |
RS485 CAN |
| Additionally |
Operating voltage range: 44.8–58.4 V Maximum battery capacity: 5.12 kWh Cooling mode: Passive Contents: 3 sets of M5x30 combination screws – 4 pcs, Rechargeable battery You can connect up to 12 batteries in parallel, increasing the total system capacity from 15 to 921 kWh The battery eliminates the risk of fire, and built-in monitoring systems ensure an instant response to abnormal situations — in just 5 seconds |
| Dimensions | 590 x 390 x 133.5 |
| Weight | 47 |
Question about Dyness STACK LiFePO4 51.2V 100Ah 5.12kWh without BMS (S51100)
💎 Как часто выбирают товар?
There are assemblies with this product
Comments (0)
Только зарегистрированные пользователи могут оставлять комментарии